Sorularınız mı var?
(+90) 486 534 20 73
Sorularınız mı var?
(+90) 486 534 20 73
Ademix

Ademix Water Stop

Construction Chemicals

Waterproofing Materials​

Ademix Water Stop

Fiberated Insulation Of Terrace-Roof

Ademix Water Stop

Fiberated Insulation Of Terrace-Roof

 

Product Description:

It is a polypropylene fiber added, acrylic resin-based, silicone-elastic TERRACE-ROOF waterproofing coating. 

Product Specifications:

Provides excellent moisture and water insulation.. 

Easily enables waterproofing on cracks.

It is reinforced thanks to polypropylene micro fiber and shows more effective resistance against mechanical impacts.

Thanks to the biocide in its structure, bacterial growth do not occur on the material… 

It is not affected by temperature change. (-30 ° C ± 70 ° C)

Area Of Usage:

It can be used safely on concrete surfaces that require waterproofing such as roofs, foundations, basement walls, especially at joints or parts with risk of cracking and under chimneys..

Surface Preparation:

The surface should be strong, dry, clean and self-supporting. The surfaces to be painted, all kinds of dirt, dust, loose layers should be cleaned and the necessary surface repair and restore operations should be done. All kinds of oil, grease, rust residues that will weaken adherence should be removed from the surface before application.

Application:

If it is going to be applied for the first time, it is thinned with 30% water and folded as a primer, the second layer is made without thinning.

Thinning And Application Specifications : 

Thinning rate: 20% first coat primer application with water

Application temperature (° C): 5 – 35

Covering area (m² / kg): 1-1,5 (in one layer) There may be changes in consumption according to the type, absorbency and structure of the application surface. 

Technicial Specifications : 

Resin: Elastomeric resin

Brightness: Matt

Solid content (by weight) % : 56-58%

Viscosity (25 ° C-KU): 105-110

Density (20 ° C-gr / cm³): 1,30-1,36

Ph (25 ° C): 8-9

Drying time (at 20 ° C, 65% HR)                         

First drying (hours): 12 

2. Floor duration (hours): 24 

Final drying (hours): 24-48 hours (Depending on the ambient temperature and relative humidity, the drying time may vary.)

Storage: 

It can be stored for 2 years at 5-35 ° C in its unopened packaging, in a cool and dry place, protected from direct sunlight. Close the packaging cap hermetically sealed immediately after use.

Item Number : 

Packing Information: 

20 kg – 10 kg

Health And Safety Information: 

Hazard Statement: 

H317: It causes allergic skin reactions.   

Precautionary Statement:

 If medical advice is required, keep the packaging or label.

 P102: Keep out of reach of children.

 Read the label before using.

 P261: Avoid breathing dust / fume / gas / mist / vapor / spray.

 P280: Wear protective gloves / protective clothing / eye protection / face shield.

 P333 + P313: If you show skin irritation or pruritus symptoms : Get medical advice / attention.

 P501:  Dispose of contents/ container in accordance with local/ regional/ national/ international regulations.

* Apply to the nearest health institution for unexpected health problems..