Construction Chemicals
Waterproofing Materials
- Ademix Isoflex 7000
- Ademix Isoflex Uv 7010
- Ademix Isoflex Plus 7020
- Ademix Isoplug 7130
- Ademix 7135 SS
- Ademix Epo Coat 7080
- Ademix Water Blocker 7099
- ADEMİX 7501 Pol Primer
- Ademix 7502 Pol Waterproof
- Ademix 7503 Pol Waterproof UV
- Ademix 7504 Pol Transparent
- Ademix 7505 Pol Waterproof 2K
- Ademix 7506 Pol Waterproof Al
- Ademix Akrilik 600
- Ademix Water Stop

Ademix 7135 SS
Silane Siloxane Based Water Repellent Impregnation Material
Silane Siloxane Based Water Repellent Impregnation Material
It Is A Silane Siloxane Based, Solvent Based, Colorless, Impregnated Water Repellent.
It is used in vertical applications on the exterior; on absorbent and less absorbent surfaces such as concrete, marble, brick, aerated concrete, slate.
It is resistant to alkalines and UV rays.
It makes the exterior materials impermeable and prevents the materials from spoiling.
It provides protection without changing the appearance of exterior materials and creating a film layer.
It is vapor permeable.
Drying Time: 24 hours
Density: ~ 0,80 kg/lt
:
Application Temperature: (+5°C) – (+25°C)
Average Consumption: First coat: 0,35 liter/m2
Second coat: 0,25 liter/m2
*These values are valid for 23°C and 50% relative humidity. Times may vary depending on ambient conditions.
-The surface must be clean and dry, and free from oil, dirt, grease, coatings and other dirt that will prevent adhesion.
-It should be ensured that the application surface is set and dry.
It is a ready to use material. Absolutely no water should be added.
It is applied on dry surfaces with suitable roller, brush or by spraying. Approximately 4 hours later, the second coat is applied. 3rd coat can be applied to extremely porous surfaces.
-For the best results in ADEMIX 7135 SS application, the ambient temperature must be between +5°C and +25°C and necessary precautions must be taken in bad weather conditions.
– It should not be applied on damp and wet surfaces.
-A pre-test should be done on a small surface before the application.
-Some surfaces may change color.
-The tools and equipment used should be cleaned with a suitable solvent after the application.
All necessary Occupational Health and Safety measures must be taken in the application areas. All work safety equipment, such as work clothes, protective gloves/goggles /mask, should be used during the application in accordance with the Occupational Health and Safety rules. Ventilation of the working area is required. Warehouse and stock areas should not be approached with fire. Contact of the product with the skin and eyes should be prevented, in such a case, the contacted part of the skin should be washed with plenty of water and medical attention is required immediately. Food and beverages should also not come into contact with the product. It should be kept out of reach of children.
Transparent
5 liter can
It should be stored in a cool, dry and frost-free environment in its original package. Under proper storage conditions, it is 1 year from the date of production.