Ademix Water Blocker 7099
Acrylic & Solvent Based Waterproofing Material
Ademix Water Blocker 7099
Acrylic & Solvent Based Waterproofing Material
Description:
Acrylic Based, Solvent Based, Single Component, Smearing Waterproofing Material.
Areas of Use:
It is used in roofs and concrete structures, waterproofing of balconies and terraces, waterproofing of concrete, brick, asbestos cement, bridge and similar reinforced concrete structures.
Advantages:
It is easy to apply.
It provides jointless and continuous waterproofing on the applied surface.
It adheres perfectly to the surface.
It is ok to walk on it.
It shows excellent mechanical and chemical properties,
It has high abrasion strength.
It dries in a very short time.
Technical Specifications:
Density: 1.40 ± 0,10 gr/ml
Shore D Hardness: ̴ 80
Adhesion to Concrete Strength: ≥ 2 N/mm²
Application Information:
Application Temperature: (+5°C) – (+30°C)
Surface Humidity Content: Humidity ratio <4% by weight
Drying Time: ~ 1-2 hours
Full Curing Time: ~ 7 days
Average Consumption: 0,400-0,600 kg/m² (for single layer)
*These values are valid for 23°C and 50% relative humidity. Times may vary depending on ambient conditions.
Surface Preparation:
-The surface must be clean and dry, and free from oil, dirt, grease, coatings and other dirt that will prevent adhesion.
-Large fractures and faults must be repaired beforehand.
– Chamfering should be done to corners and joints in the application area.
-The cement crust and glossy screed sanding on the concrete surface should be cleaned with tools such as a notching machine, diamond drum wiping machine, driven grinding, and the surface should be roughened and wiped.
-The entire surface of the industrial vacuum cleaner should be cleaned from dust.
Mixture Preparation:
Before applying ADEMIX WATER BLOCKER 7099, it should be stirred for 2 minutes to obtain a homogeneous consistency.
Application:
ADEMIX WATER BLOCKER 7099 should be poured on the surface and propagated with a brush or roller until the entire surface is covered.
ADEMIX WATER BLOCKER 7099 should be applied on the surface with a brush or roller, and should be placed on the surface where polyester felt is applied. ADEMIX WATER BLOCKER 7099 should be applied until the felt is saturated.
– Problematic areas such as wide surfaces, floor-wall joints, parapet corners, chimney flashings should be strengthened. For this, 50 – 60 gr/m² synthetic felt should be used.
– Contains solvent, is flammable. Do not approach with an open flame and do not smoke during application.
-In closed spaces, ventilation should be done during the application.
-All tools and application equipment should be cleaned with thinner immediately after use. Hardened/cured material can only be removed by mechanical methods.
Warnings:
All necessary Occupational Health and Safety measures must be taken in the application areas. All work safety equipment, such as work clothes, protective gloves/goggles /mask, should be used during the application in accordance with the Occupational Health and Safety rules. Ventilation of the working area is required. Warehouse and stock areas should not be approached with fire. Contact of the product with the skin and eyes should be prevented, in such a case, the contacted part of the skin should be washed with plenty of water and medical attention is required immediately. Food and beverages should also not come into contact with the product. It should be kept out of reach of children.
Color:
White
Package:
20 kg Tin Can
Shelf life: Storage conditions
It should be stored in its original package in a dry environment, protecting from frost.
If appropriate storage conditions are provided, it is 9 months from the production date.