Ademix 705 SL

Self  Levelling Screed

Cement Based Self-Propagating Levelling Screed

It is used as a levelling screed in places where there is heavy human traffic such as housing, workplace, hotel, dormitory, hospital, school; in the fixing of damaged surfaces under the laminated-wooden parquet, carpet, PVC, linoleum covering. 

It has high adherence. 

It does not crack and swell.

It has the feature of propagating by itself.

It is not a topcoat material. It prepares a suitable floor for the final flooring (ceramic, carpet, parquet, PVC, etc.).

Flexural Strength: ≥ 7 N/mm²
 Compression Strength: ≥ 25 N/mm² 

Max. Grain Size: 1 mm

*The above values are valid for 28 days of performance that was obtained as a result of laboratory experiments.

:

Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 4,5 – 5,5 lt water / 25 kg powder
 Usable Time: 20 minutes

Application thickness: 3–10 mm 

Average Consumption: 1.5-1.8 kg/m² (1 mm for thickness)

*These values are valid for 23°C and 50% relative humidity. Times may vary depending on ambient conditions.

­ -The application surface should be made clean from dust, dirt, oil, paint residue, and similar foreign matters reducing adherence.

-Surface should be cured and solid.

­If there are surface defects (holes and cavities), they should be filled with ADEMIX REPAIR at least 1 day in advance.

-The surface should be moistened with water before the application.

25 kg of ADEMIX 705 SL is added slowly to 4.5-5.5 liters of water. It is stirred until a homogeneous mixture is obtained with a low-speed mixer, leaving no lumps. The prepared mortar should be rested for 5 minutes.

The prepared mixture is poured onto the surface and the thickness of the self-propagating mortar is adjusted with a trowel. The spiked roller can be used to prevent air bubbles.In places that require a second coat application, the application should be started as soon as the first coat becomes hard.

-In-floor heating systems, the system should be turned off at least 24 hours before the application.

-In order to avoid elevation differences in large areas and to be properly applied, tile cladding with a maximum of 3×3 m dimensions should be made and application levels should be determined. 

-In order for the mortar to adhere to the floor better, it should be primed with ADEMIX FILLED PRIMER.

-Applications should not be carried out in temperatures below 5°C.

-It should not be applied on surfaces that are exposed to direct sunlight and wind without taking protective measures.

-Foreign materials should never be mixed into the mortar.

-After application, all used tools should be washed with plenty of water before drying.

: 

Do not inhale the product directly, as it is cement-based. Avoid contact with skin and eyes.

TS EN 13813 

CT- C25- F7

Grey
25 kg kraft bag 

: 12 months in the dry environment and original package.