Construction Chemicals
Repair Mortars
Ademix Repair M20
Thick Repair Mortar
Ademix Repair M20
Thick Repair Mortar
Description:
Cement-based polymer and fiber-reinforced thick repair mortar
Areas of Use:
It can be used in interior and exterior surfaces of joints of main building elements, restoration and repair works, filling thick cracks, fractures, cracks, holes and surface losses.
Advantages:
It adapts easily to the applied surface.
It displays good performance with its high adherence.
It is used for fractures, cracks, holes, and surface losses.
Ideal for filling deep cracks.
Technical specifications:
Adhesion Strength: ≥ 0.5 N/mm²
Flexural Strength: ≥ 3 N/mm²
Compression Strength: ≥ 10 N/mm²
Fire Reaction Class: A1
*The above values are valid for 28 days of performance that was obtained as a result of laboratory experiments.
Application Information :
Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 5 – 6 lt water / 25 kg powder
Usable Time: 1 hour
Application Thickness: 5-20 mm
Average Consumption: 1,5-2 kg/m² (for 1 mm thickness)
*These values are valid for 23°C and 50% relative humidity. Times may vary depending on ambient conditions.
Surface Preparation:
-The application surface should be made clean from dust, dirt, oil, paint residue, and similar foreign matters reducing adherence.
– In surface-mounted applications, the surface must be completely hardened.
If the surface has low adherence, broken, loose parts, these parts must be removed from the surface.
-The floor should be dampened, moistened, and saturated with water.
Mixture Preparation:
25 kg of ADEMIX REPAIR M20 is slowly added to 5 – 6 liters of water. Stirred until a homogeneous mixture is obtained with a trowel or a low-speed mixer, leaving no lumps.The mortar, which is rested for 5 minutes, is stirred again before using and its homogeneity is checked.
Application:
The prepared mixture is filled by applying pressure to the broken, cracked, broken areas on the floor with a steel trowel. For smooth surfaces, polishing is done with a damp sponge. The sponge should be cleaned frequently.
Surfaces, where ADEMIX REPAIR M20 is applied, must be moistened within 12-24 hours. The second humidification should be done 24 hours after the first humidification. The surface should be moistened for 2-3 days. Further irrigation increases material performance.
Application thickness should not exceed 10 mm in one coat. In thicker applications, the application should be done in two layers. The second layer should be made after the first layer dries. The surface should be moistened before applying the second layer.
The expired mortar should not be used.
Should not be applied in temperatures below 5°C.
-Should not be applied on surfaces that are exposed to direct sunlight and wind without taking protective measures.
-Foreign materials should never be mixed into the mortar.
-After application, all used tools should be washed with plenty of water before drying.
Warnings:
Do not inhale the product directly, as it is cement-based. Avoid contact with skin and eyes.
Reference Standard:
TS EN 1504-3 / R1 Class
Color: Grey
Package:25 kg kraft bag
Shelf life: 12 months in dry environment and in original package