ADEMIX SATIN BRIGHT INTERIOR PAINT
PRODUCT DESCRIPTION:
It is a water-based, pure acrylic resin-based, washable, fully wipe, extra hiding, silicone-added decorative topcoat silk glossy interior paint.
PRODUCT SPECIFICATIONS:
Fully Wipeable, washable
Ketchup, watercolor, pencil stains can be easily removed,
Silk bright
Odorless.
Breathing feature
High covering
Can easily cover dark colors on the surface
High quantity
Does not leave brush and roller marks
Does not splash
Does not crack, swell and spill
AREA OF USAGE:
ADEMİX SATEN Glossy Interior Wall Paint is applied after the proper priming process is completed on old, newly painted, plastered walls, gypsum, putty, plasterboard, cement board, surfaces.. Conversion primer should be applied on old painted water, solvent based surfaces. Light sanding should not be forgotten on all surfaces.
SURFACE PREPARATION:
The application surfaces should be smooth, solid, and capable of carrying the primer and the finishing paint. The surfaces to be painted, all kinds of dirt, dust, loose layers should be cleaned and the necessary surface repair and repair operations should be done.
APPLICATION:
On new plaster interior surfaces to be applied for the first time, ADEMİX Interior Filled Primer should be used. Absorbent and dust-like surfaces such as gypsum, gas concrete ADEMIX 5/1 Transparent Primer or ADEMIX 7/1 Concentrated Primer should be applied as a single layer so as not to form a glassy film on the surface. It should not be applied directly to lime or gypsum surfaces. In order to increase the coverage of the paint on very dirty surfaces, 1 coat of existing paint should be thinned with 30% water and applied in one or two coats of paint. It should be paid attention that the ambient and surface temperature should be between + 5 ° C and + 30 ° C during the application and until the complete drying of the products. It can be applied by brush, roller and spraying.
THINNING AND APPLICATION SPECIFICATIONS :
Thinning rate: 3-5% with water
Application temperature (° C): 5 – 30
Covering area (m² / lt): 16-18 (Single layer) Depending on the type, absorbency and structure of the application surface, there may be changes in consumption.
TECHNICIAL SPECIFICATIONS :
Resin: Pure acrylic copolymer
Luster: Silk
Solid content (by weight)%: %50-65%
Viscosity (25 ° C-KU): 100-105
Density 20ºC: 1,19- – 1,26 g / cm3
Ph (25 ° C): 8-9
Drying time (at 20 ° C, 65% HR)
Touch dry (min): 20 – 40
Waiting time between layers (hours): 4-6
Final drying (hours): 12-20 hours (Depending on the ambient temperature and relative humidity, the drying time may vary.)
STORAGE:
It can be stored for 1 years at 5-30 ° C in its unopened packaging, in a cool and dry place, protected from direct sunlight. Close the packaging cap hermetically sealed immediately after use.
ITEM NUMBER :15.540.1206 / 15.540.1217 / 15.540.1218 / 15.540.1219 RATE NUMBER: 10.300.1031
PACKING INFORMATION:
15 lt, 7.5 lt, 2.5 lt
HEALTH AND SAFETY INFORMATION:
HAZARD STATEMENT
H317: It causes allergic skin reactions.
PRECAUTIONARY STATEMENT:
If medical advice is required, keep the packaging or label.
P102: Keep out of reach of children.
Read the label before using.
P261: Avoid breathing dust / fume / gas / mist / vapor / spray.
P280: Wear protective gloves / protective clothing / eye protection / face shield.
P333 + P313: If you show skin irritation or pruritus symptoms : Get medical advice / attention.
P501: Dispose of contents/ container in accordance with local/ regional/ national/ international regulations.
* Apply to the nearest health institution for unexpected health problems..