Ademix Mat Plastic İnterior Paint
Styrene Acrylic emulsion based, Matt Plastic interior wall paint.
Matt
Odorless.
Breathing feature
High covering
Can easily cover dark colors on the surface
High quantity
Does not leave brush and roller marks
Does not splash
Does not crack, swell and spill
ADEMİX Matt Plastic Interior Wall Paint is applied after the proper priming process is completed on old, newly painted, plastered walls, gypsum, putty, plasterboard, cement board surfaces.
The application surfaces should be smooth, solid, and capable of carrying the primer and the finishing paint. The surfaces to be painted, all kinds of dirt, dust, loose layers should be cleaned and the necessary surface repair and repair operations should be done.
On new plaster interior surfaces to be applied for the first time, ADEMİX Interior Filled Primer should be used. Absorbent and dust-like surfaces such as gypsum, gas concrete ADEMIX 5/1 Transparent Primer or ADEMIX 7/1 Concentrated Primer should be applied as a single layer without forming a glassy film layer on the surface. It should not be applied directly to lime or gypsum surfaces. In order to increase the coverage of the paint on very dirty surfaces, 1 coat of existing paint should be thinned with 30% water and applied in one or two coats of paint. It should be paid attention that the ambient and surface temperature should be between + 5 ° C and + 30 ° C during the application and until the complete drying of the products. It can be applied by brush, roller and spraying.
Thinning rate: 15-25% with water
Application temperature (° C): 5 – 30
Covering area (m² / lt): 9-14 (Single layer) Depending on the type, absorbency and structure of the application surface, there may be changes in consumption.
Resin: Styrene acrylic copolymer
Brightness: Matt
Solids content (by weight) %: 50-65%
Viscosity (25 ° C-KU): 120-130
Density (20 ° C-gr / cm³): 1,58-1,60
Ph (25 ° C): 8-9
Drying time (at 20 ° C, 65% HR)
Touch dry (min): 30 – 60
Waiting time between layers (hours): 4-6
Final drying (hours): 12-20hours (Depending on the ambient temperature and relative humidity, the drying time may vary.)
It can be stored for 1 years at 5-30 ° C in its unopened packaging, in a cool and dry place, protected from direct sunlight. Close the packaging cap hermetically sealed immediately after use.
20 kg – 10 kg – 3.5 kg
HAZARD STATEMENT
H317: It causes allergic skin reactions.
If medical advice is required, keep the packaging or label.
P102: Keep out of reach of children.
Read the label before using.
P261: Avoid breathing dust / fume / gas / mist / vapor / spray.
P280: Wear protective gloves / protective clothing / eye protection / face shield.
P333 + P313: If you show skin irritation or pruritus symptoms : Get medical advice / attention.
P501: Dispose of contents/ container in accordance with local/ regional/ national/ international regulations.
* Apply to the nearest health institution for unexpected health problems..