Sorularınız mı var?
(+90) 486 534 20 73
Sorularınız mı var?
(+90) 486 534 20 73
Ademix

Ademix Acrylic Exterior Paint

Dyes

Exterior Paints

ADEMIX ACRYLİC EXTERIOR PAINT

It is a Styrene Acrylic emulsion-based exterior paint that is resistant to moisture and water. 

Thanks to the silicone additive, it has high water repellency resistance. 

Has high water vapor permeability

Moisture and water resistant, high alkali and chemical resistance

It is extremely resistant to the negative effects of the sun rays and the salty moisture in the sea shores.

Has high hiding power

High coverage area

Does not leave brush and roller marks

Does not splash

Does not crack, swell and spill

Removable

ADEMIX Exterior Paint is used on all kinds of exterior, concrete, briquette, gas concrete, plaster, brick and similar mineral surfaces. 

The application surfaces should be smooth, solid, and capable of carrying the primer and the top coat paint. The surfaces to be painted, all kinds of dirt, dust, loose layers should be cleaned and the necessary surface repair and repair operations should be done.

 On recently plastered interior surfaces to be applied for the first time, ADEMIX Silicone Exterior Primer or ADEMIX Exterior Primer should be used. After the primer is applied, top coat paint should be applied in two coats. It should be paid attention that the ambient and surface temperature is between + 5°C and + 30°C during the application and until the complete drying of the products. It can be applied by brush, roller and spraying.

  Thinning rate: 10 – 15 % with water

  Application temperature (°C): 5 – 35

 Covering area (m² / lt): 11-15 (Single layer) There may be changes in consumption according to the type, absorbency and structure of the application surface.

Resin                                   :  Styrene acrylic copolymer

Gloss                                                  :  Flat

Solid content (by weight) %: 50-70

Viscosity (25°C-KU)                        : 120-130

Density 20ºC : 1,40- – 1,50 g / cm3

Ph  (25°C)                                         : 8-9

Drying time (at 20°C, 65% HR)                         

Touch dry (minutes)                   : 30 – 60 

Waiting time between layers (hours)     : 4-6  

Final drying (hours): 12-20 hours (Depending on the ambient temperature and relative humidity, the drying time may vary.)

It can be stored for 1 years at 5-35°C in its unopened packaging, in a cool and dry place, protected from direct sunlight. Close the packaging cap immediately after use so that it does not contact with air.

ITEM NUMBER :15.540.1304 RATE NUMBER: 10.300.1012

15 lt, 7.5 lt, 2.5 lt

HAZARD STATEMENT 

 H317: It causes allergic skin reactions.  

 If medical advice is required, keep the packaging or label.

 P102: Keep out of reach of children.

 Read the label before using it.

 P261: Avoid breathing dust/fume/gas/mist/vapor/spray.

 P280: Wear protective gloves/protective clothing/eye protection/face shield.

 P333 + P313: If you show skin irritation or pruritus symptoms : Get medical advice/attention.

 P501:  Dispose of contents/container in accordance with local/regional/national/international regulations.

*Apply to the nearest health institution for unexpected health problems.