Styrene Acrylic is a copolymer emulsion based, mat looking, decorative interior white ceiling paint.
High extra hiding
Does not leave brush and roller marks
Does not splash
Does not crack, swell and spill
AREA OF USAGE:
Satin plaster, putty surfaces and plasterboard surfaces are recommended to be used on the interior ceiling surfaces that are old and without risk of dusting..
If old painted surfaces spill and swell, clean the surface by scraping.
Ceiling surfaces applied to paint should be cleaned from all kinds of dirt, swollen layers and necessary surface repair should be made. Setting times should be observed for plaster and gross concrete surfaces. ADEMIX 7/1 Primer It is recommended to use. It should be paid attention that the ambient temperature should be between + 5 ° C and + 30 ° C during application. Apply two coats with roller and brush, wait 5-7 hours between coats.
THINNING AND APPLICATION SPECIFICATIONS:
Thinning rate: 20-30% with water
Application temperature (° C): 5 – 35
Covering area (m² / kg): 6-8 (Single layer) There may be changes in consumption according to the type, absorbency and structure of the application surface.
TECHNICIAL SPECIFICATIONS :
Resin: Styrene acrylic copolymer
Solid content (by weight)%: 65-67
Viscosity (25 ° C-KU): 120-130
Density (20 ° C-gr / cm³): 1,68-1,71