Sorularınız mı var?
(+90) 486 534 20 73
Sorularınız mı var?
(+90) 486 534 20 73
Ademix

Ademix Transparent Plaster Clear Primer 1/5

Dyes

Primers

Ademix Transparent Interior Clear Primer (1/5)

Ademix Transparent  Interior Transparent Primer (1/5)

Product Description:

Water and Styrene acrylic-based, a transparent interior primer that reduces the top coat paint consumption.

Properties:

Penetrates deep into surfaces. 

Breathing feature

Reduces paint consumption

Does not create a glassy surface

Increases vapor permeability.

Areas Of Use:

Used as a primer on satin plastered surfaces, plasterboard, highly absorbent surfaces, and surfaces repaired with Wall Putty and calcareous surfaces before the top coat paint application. 

.Surface Preparation:

Loose swollen paints on the surface should be cleaned, level problems on the surface should be filled with suitable putty and sanded. Free dust and dirt on the surface should be cleaned with a brush, the surface should be clean and dry.

Application:

The concentrated primer is diluted with 1 liter of product and 5 times water and applied with a roller or brush in one layer.

Care should be taken that the ambient temperature is between + 5°C and + 30°C during the application.

Thinning And Application Properties:

  Thinning rate: Dilute 1 LT product with 5 times water. 

  Application temperature (°C): 5 – 35

 Covering area (m²/lt): 35-55 (Single layer) There may be changes in consumption according to the type, absorbency and structure of the application surface. 

Technical Specifications: 

Resin                                               :  Styrene acrylic copolymer

Gloss                                               :  gloss

Solid content (by weight)%       :  20-25

Viscosity (25°C-KU)                     : 50-55

Density (20°C-gr/cm³)               : 1,0 – 1,05

Ph  (25°C)                                       : 8-9

Drying time (at 20°C, 65% HR)                         

Touch dry (minutes)  : 30 – 60 

Waiting time between layers (hours)     : 4-6  

Final drying (hours): 12-20 hours (Depending on the ambient temperature and relative humidity, the drying time may vary.)

Storage: 

It can be stored for 1 years at 5-35°C in its unopened packaging, in a cool and dry place, protected from direct sunlight. Close the packaging cap immediately after use so that it does not contact with air.

POS No :10.300.1151

Packaging Information: 

15 lt,7,5 lt 2,5 lt

Health And Safety Information: 

HAZARD STATEMENT 

 H317: It causes allergic skin reactions.  

Precautionary Statement:

 If medical advice is required, keep the packaging or label.

 P102: Keep out of reach of children.

 Read the label before using it.

 P261: Avoid breathing dust/fume/gas/mist/vapor/spray.

 P280: Wear protective gloves/protective clothing/eye protection/face shield.

 P333 + P313: If you show skin irritation or pruritus symptoms : Get medical advice/attention.

 P501:  Dispose of contents/container in accordance with local/regional/national/international regulations.

*Apply to the nearest health institution for unexpected health problems.