Ademix Pure Acrylic Silicone Bright Exterior Paint



Ademix Pure Acrylic Silicone Bright Exterior Paint




PRODUCT DESCRIPTION:

Water-based, 100% pure acrylic binder-based, excellent coverage, bright, low contamination tendency, Moisture and water resistant, high coverage, alkali and chemical resistance, long-lasting flexible exterior paint. It spreads easily, provides application comfort, high resistance to sun rays and colors create awareness by staying bright and vivid like the first day.

PRODUCT SPECIFICATIONS:

Thanks to the silicone additive, it had high water repellency resistancer.

High water vapor permeability

Moisture and water resistant, high alkali and high chemical resistance

It is extremely resistant to the negative effects of the sun’s rays and the salty moisture on the sea shore.

Covering is high.

High quantity

Does not leave brush and roller marks

Does not splash

Does not crack, swell and spill

It washes itself in the rain, does not hold dirt

AREA OF USAGE:

ADEMİX PURE ACRYLIC SILICONE BRIGHT Exterior Paint, It is used on all kinds of exterior, concrete, briquette, gas concrete, plaster, brick, mineral surfaces.

SURFACE PREPARATION:

The application surfaces should be smooth, solid, and capable of carrying the primer and the finishing paint. The surfaces to be painted, all kinds of dirt, dust, loose layers should be cleaned and the necessary surface repair and repair operations should be done.

APPLICATION:

New plaster interior surfaces to be applied for the first time ADEMİX Silicone Exterior Primer should be used. After the primer is applied, top coat paint should be applied in two coats. It should be paid attention that the ambient and surface temperature should be between + 5 ° C and + 30 ° C during the application and until the complete drying of the products. It can be applied by brush, roller and spraying.

Instruction No: TDS-20003 Rev. No: 00 Effective Date: 01.07.2020 ⇥⇥⇥⇥ Page No: 2/2

THINNING AND APPLICATION SPECIFICATIONS :

Thinning rate: 1-5% with water

Application temperature (° C): 5 – 35

Covering area (m² / lt): 12-16 (Single layer) There may be changes in consumption according to the type, absorbency and structure of the application surface.

TECHNICIAL SPECIFICATIONS :

Resin: Pure acrylic 100%

Brightness: Bright

Solid content (by weight) : %50-%65

Viscosity (25 ° C-KU): 100-105

Density 20ºC: 1,18 – 1,26 g / cm3

Ph (25 ° C): 8-9

Drying time (at 20 ° C, 65% HR)                         

Touch dry (min): 30 – 60

Waiting time between layers (hours): 4-6

Final drying (hours): 12-20 hours (Depending on the ambient temperature and relative humidity, the drying time may vary.)

STORAGE:

It can be stored for 2 years at 5-35 ° C in its unopened packaging, in a cool and dry place, protected from direct sunlight. Close the packaging cap hermetically sealed immediately after use.

ITEM NUMBER :15.540.13043 RATE NUMBER: 10.300.1011-103001012

PACKING INFORMATION:

15 lt, 7.5 lt, 2.5 lt

HEALTH AND SAFETY INFORMATION:

HAZARD STATEMENT

H317: It causes allergic skin reactions.

PRECAUTIONARY STATEMENT

If medical advice is required, keep the packaging or label.

P102: Keep out of reach of children.

Read the label before using.

P261: Avoid breathing dust / fume / gas / mist / vapor / spray.

P280: Wear protective gloves / protective clothing / eye protection / face shield.

P333 + P313: If you show skin irritation or pruritus symptoms : Get medical advice / attention.

P501:  Dispose of contents/ container in accordance with local/ regional/ national/ international regulations.

* Apply to the nearest health institution for unexpected health problems..




PDF İNDİR


İndir (PDF)

Address

İpekyolu üzeri Ökten Sahası No: 277 – Silopi/Şırnak-Turkey
(+90) 486 534 20 73


info@ademix.com.tr

Location





Social media

Follow Our Activity



Open chat