Ademix 101

Ceramic & Tile Adhesive



ADEMIX 101
Ceramic & Tile Adhesive

Description:
Cement-based white ceramic adhesive with reduced slip and extended time.

Areas of Use:
Applied on materials such as tiles, mosaics, ceramics, etc. to be used on vertical and horizontal surfaces plastered with lean concrete, reinforced concrete, or cement plaster both indoors and outdoors.

Advantages:
Easy to apply
Does not slip.
High adhesion strength.
It can be processed easily and for a long time.
It can be used on wet floors in the kitchen, bathroom, etc.

Technical specifications:
Slip: ≤0.5 mm
Adhesion Strength:
– After Open Waiting Time: After at least 30 min. ≥0.5 N/mm²
– Initial: ≥0.5 N/mm²
– After Dipping in Water: ≥0.5 N/mm²
– After Aging with Heat: ≥0.5 N/mm²
– After Freeze-Thaw Cycle: ≥0.5 N/mm²
Temperature Resistance: (-40°C) – (+80°C)
Reaction to Fire Class: A1

*The above values have been obtained through laboratory tests and are valid for 28 days of the performance.

Application Information:
Application Temperature: (+5°C) – (+35°C)
Mixing Ratio: 6 – 7 lt of water / 25 kg of powder
Usable for: 3 hours
Open waiting time: 30 min.
Application thickness: 3–10 mm
Grouting Time: 24 hours
Consumption Average: 3 – 5 kg / m2

* These values are valid for 23 ° C and 50% relative humidity. Times may vary depending on ambient conditions.

Surface Preparation:
-The application surface should be made clean from dust, dirt, oil, paint residue, and similar foreign matters reducing adherence.
-It should be ensured that the application surface is set.
-The surface must be moistened before the application.
-The dusty surface behind the ceramic should be moistened and wiped.

Application:
The prepared mixture should be spread on the surface with the flat part of the trowel to ensure good adhesion and then combed with a notched trowel suitable for the size of the tile to be used.Ceramics must be bonded to the combed mortar within 30 minutes. Good adhesion should be obtained by pressing on the laid material by hand and applying force with a rubber hammer.

-The adhesive should be used by applying to small areas, and any adhesive that delays material bonding and that has started to get crusty should be cleaned by scraping off the surface.
-The excess adhesive in joint gaps should be scraped before drying, and the mortars on the surface should be cleaned with a damp cloth.
Applications should not be carried out in temperatures below -5°C.
-It should not be applied on surfaces that are exposed to direct sunlight and wind without taking protective measures.
-Foreign materials should never be mixed into the mortar.
-After application, all used tools should be washed with plenty of water before drying.
-Grouting can be started after 24 hours.
-Tiles stuck with Adamix 101 should not be exposed to water for at least 24 hours.
-Depending on the location and the type of ceramic to be applied, double-sided bonding should be done.
*Ademix 103 should be used in light-colored ceramic applications.

Warnings:
Do not breathe the product directly, as it is cement-based. Avoid contact with skin and eyes.

Reference Standard:
TS EN 12004 -1 C1TE class
C:Cement-based
1: Standard performance
T: Reduced slip.
E: Extended open waiting time

Color: Grey
Package: 25 kg. kraft paper bag
Shelf life: 12 months in dry environment and in original packaging




PDF İNDİR


İndir (PDF)

Address

İpekyolu üzeri Ökten Sahası No: 277 – Silopi/Şırnak-Turkey
(+90) 486 534 20 73


info@ademix.com.tr

Location





Social media

Follow Our Activity